Dormitory Management
“Walking every room to read meters at month-end”
Room 205 has used 3× the average water for 5 days running — likely a leaking pipe or cistern
- Every room by floor, with this cycle's power and water units
- A room with abnormal usage highlighted in red
- The calculated bill per room
- How many bills have gone out on LINE this cycle
Figures on this screen are illustrative; a real one shows readings from your own site.
What you see
- A misread meter, and a tenant disputing the bill
- A whole day lost to reading meters and working out charges
- Bills go out late, so payment comes in late too
What we do
Water and power meters in every room read themselves; the system works out the charges, issues the bill and sends it to each tenant on LINE.
How it works
Power and water meters in every room, read automatically each day
Collects every room in the building and sends it to the cloud
Each room's consumption history, kept on servers in Thailand
Momosight flags a room using far more than it used to — usually a leak or a failing appliance
Charges worked out per room, bills issued, payment status on one screen
Bills sent to tenants over LINE, and the manager told when a room looks wrong
What it does
No walking the rooms; the charge comes from the meter itself.
Units worked out at your rates, with the building's total alongside.
Tenants get the bill the moment it is issued — no deliveries, fewer disputes.
A room whose usage jumps is raised for checking.
Show a tenant exactly which period the units came from.
Owners with more than one building see them together, with access per property.
Devices used in this system
Prices are per set; how many you need depends on the site.
Where it fits
Many rooms, one monthly cycle
Monthly and annual tenants
Short stays charged on actual use
Factories housing their workers
Several units on one plot
Stalls and shops charged for what they use
How we work with you
- 01Survey the building
Count the rooms, look at the existing meters, the panels and the network.
- 02Install and test
Meters and gateway fitted, readings checked against the meters themselves.
- 03Rates and billing cycle
Your rates, the billing day, and the message tenants receive.
- 04Support afterwards
Annual MA with remote and on-site support.
Related documents
Questions about this system
Can it use the meters already installed?
Yes, if they give a pulse output or speak Modbus. Old disc meters have to be replaced with ones that can be read online.
Can it cut power to a room in arrears?
What we install reads meters, works out the charges and sends the bills. Cutting and restoring power per room needs extra hardware and a design of its own — ask us and we will assess it.
Can tenants see their own usage?
The bill sent over LINE states the units and the period they cover. Managers can open the per-room history in the system.
How long does a building take?
It depends on the room count and the panels. Buildings of 30 to 50 rooms are usually done within a few working days; we confirm the schedule at the survey.